DIGITAL TACH/HOUR METER ---- It is an useful device which applicable to gas engine powered equipments; It include features of hours tracking,maintenance reminder,RPM record and alert; It avaliable 2 kinds of operating systems to meet user's different using habits: You can check all of functions during system DSP-1; And you can enter 2 individual channels for hours or RPM if you would like to use one of them but check TOT and RPM running value at the same time during system DSP-2.
MAINTENANCE HOUR METER ---- It help to track the total and partial hours when it shut off; Perform the regular maintenance task such as oil/filter replacement etc. and remind its due time. Running hours range: 0 to 999,999 hours with 0.1H/1MIN/1H accuracy, maintenance timer range: 0 to 2000 hours.
RPM METER GAUGE ---- It monitor the engine real-time RPM value when it on,help to calibrate the RPM accuracy by 9 different programmable engine firing patterns,meanwhile it display the maximum RPM hit since engine started; Available RPM alert to remind you the RPM exceed based on preset RPM value. RPM measurement and alert range: 0 to 25000 RPM with 10 RPM accuracy.
MOUNTING & SIGNAL CONNECT ---- Use the well-completed accessories by stick-on,screw-on or snap-in mounting at any proper place of equipment; Receipt of engine signal by wire connection with spark plug by wrapping(5-8 circles, inductive cable length:1.75meters/68.8 inches)
OTHER FEATURES ---- 6 large digits display; Favorable water resistance to keep good working condition upon 1 meter underwater up to rate IP67;LCD display shutdown;Built-in battery CR2450; Reliable technical support and aftersales service(2 years).
